| Maximum output: | 117dB(A) @ 1 metre [108dB(A) @ 10ft/3m] |
| Nominal output: | 110dB(A) @ 1m +/- 3dB – Tone 2 [101dB(A) @ 10ft/3m] |
| No. of tones: | 32 (UKOOA / PFEER compliant) |
| No. of stages: | 3 |
| Volume control: | Max. 110dB(A); Min. 72dB(A) – Tone 2 |
| Effective range: | 100m @ 1KHz |
| Voltages DC: | 12Vdc; 24Vdc; 48Vdc |
| Voltages AC: | 115Vac; 230Vac |
| Stage switching: | Negative or positive |
| Ingress protection: | IP66/67 |
| Enclosure matl: | Marine grade copper free LM6 Aluminium |
| Enclosure finish: | Chromate & powder coated finish – anti-corrosion. |
| Colour: | Red or Special – available on request |
| BExS110 horn: | High impact UL94 V0 & 5VA FR ABS (Red) |
| Cable entries: | Dual M20 ISO (one stopping plug inc) |
| Terminals: | 0.5 – 2.5mm² (20-14 AWG) |
| Enclosure volume: | <2 litres |
| Line monitoring: | Blocking diode included EOL Min. 500 Ohm 2w, or 3k3 Ohm 0.5w resistor |
| Grounding stud: | M5 |
| Temp. range: | -50° to +70°C (-58°F to +158°F) |
| Relative humidity: | 95% – Additional tropicalisation is recommended for applications where both high relative humidity and high ambient temperatures exist |
| MTBF DC: | 192.02 years / 1,682,086 hours – MIL 217 |
| MTBF AC: | 186.68 years / 1,635,323 hours – MIL 217 |
| Weight: | DC: 3.00kg AC: 3.20kg |
| Version A1: | SIL1 and SIL2 Route 2H |
| Version M1: | MED (Marine Equipment Directive) approved, 24V dc only |
| Version P1: | Stage programmable – 4 remotely selectable stages 45 alarm tones – any tone can be assigned to any stage. User configurable continuous frequency tone |
| Version S1/J1: | SIL2 Route 1H with diagnostics SFF: >99% See install manual for reliability & functional safety data |
| Version T1: | Tropicalised SIL1 and SIL2 Route 2H |
| *SPL data +/-3dB(A). Measured at optimum voltage. | |
| Version: | Voltage: | Current: |
|---|---|---|
| 12V dc | +/-25% | 195mA |
| 24V dc | +/-25% | 265mA |
| 48V dc | +/-25% | 130mA |
| 115V ac 50/60Hz | +10/-10% | 110mA |
| 230V ac 50/60Hz | +10/-10% | 56mA |
| Part Code: | Identifier: | Description: |
|---|---|---|
| Product type: | BExS110 | Explosion proof alarm horn sounder |
| Type: | DF | Ex d, Flare re-entrant horn |
| Voltage: | DC012 DC024 DC048 AC115 AC230 |
12V dc 24V dc 48V dc 115V ac 240V ac |
| Cable entries:[e] | A B C D E F G |
2 x M20x1.5mm 2 × 1/2" NPT – adaptors 2 × 3/4" NPT – adaptors 2 x M25x1.5mm – adaptors 1 × 1/2" NPT – adaptor 1 × 3/4" NPT – adaptor 1 x M25x1.5mm – adaptor |
| Stopping plug/ adaptor material: [m] |
B N S |
Brass Nickel Plated Stainless Steel |
| Bracket matl & tag: [s] | 1 2 3 4 |
A2 304 Stainless Steel A4 316 Stainless Steel A2 304 St/St with Equip. Tag A4 316 St/St with Equip. Tag |
| Product version: [v] | A1 M1 P1 S1 T1 |
Default – IECEx, ATEX, Ex EAC & INMETRO– SIL1 & SIL2 Route 2H IECEx, ATEX, Ex EAC & INMETRO, MED (24Vdc only)– SIL1 & SIL2 Route 2H Stage programmable – IECEx, ATEX, Ex EAC & INMETRO – SIL 1 IECEx, ATEX, Ex EAC & INMETRO – SIL2 Route 1H with diagnostics SFF: >99% Tropicalised – IECEx, ATEX, Ex EAC & INMETRO – SIL1 & SIL2 Route 2H |
| Enclosure colour: [x] | R S |
Red Special – contact E2S |
| Accessories: | ||
| SP65-0001-A4 SP65-0003-A4 |
Pole Mount Bracket Kit St/St A4 (316) Sunshade – St/St A4 (316) |
| Stage 1 | WAV file | Frequency Description. | Stage 2 | Stage 3 |
|---|---|---|---|---|
| T 1 |   |
Continuous 1000Hz Toxic Gas Alarm | T 31 | T 11 |
| T 2 | |
Alternating 800/1000Hz at 0.25s intervals | T 17 | T 5 |
| T 3 | |
Slow Whoop 500/1200Hz at 0.3Hz with 0.5s gap repeated | T 2 | T 5 |
| T 4 | |
Sweeping 800/1000 at 1Hz | T 6 | T 5 |
| T 5 | |
Continuous at 2400Hz | T 3 | T 27 |
| T 6 | |
Sweeping 2400/2900Hz at 7Hz | T 7 | T 5 |
| T 7 | |
Sweeping 2400/2900Hz at 1Hz | T 10 | T 5 |
| T 8 | |
Siren 500/1200/500Hz at 0.3Hz | T 2 | T 5 |
| T 9 | |
Sawtooth 1200/500Hz at 1Hz | T 15 | T 2 |
| T 10 | |
Alternating 2400/2900Hz at 2Hz | T 7 | T 5 |
| T 11 | |
Intermittent 1000Hz at 0.5Hz General alarm | T 31 | T 1 |
| T 12 | |
Alternating 800/1000Hz at 0.875Hz | T 4 | T 5 |
| T 13 | |
Intermittent 2400Hz at 1Hz | T 15 | T 5 |
| T 14 | |
Intermittent 800Hz 0.25s on 1s off | T 4 | T 5 |
| T 15 | |
Continuous at 800Hz | T 2 | T 5 |
| T 16 | |
Intermittent 660Hz 150mS on, 150mS off | T 18 | T 5 |
| T 17 | |
Alternating 544Hz (100mS)/440Hz(400mS) | T 2 | T 27 |
| T 18 | |
Intermittent 660Hz 1.8s on, 1.8s off | T 2 | T 5 |
| T 19 | |
1400Hz to 1600Hz sweep up over 1s -1600Hz to 1400Hz sweep down over 0.5s | T 2 | T 5 |
| T 20 | |
Continuous 660Hz | T 2 | T 5 |
| T 21 | |
Alternating 554/440Hz at 1Hz | T 2 | T 5 |
| T 22 | |
Intermittent 554Hz at 0.875Hz | T 2 | T 5 |
| T 23 | |
800Hz pulsing at 2Hz | T 6 | T 5 |
| T 24 | |
Sweeping 800/1000Hz at 50Hz | T 29 | T 5 |
| T 25 | |
Sweeping 2400/2900Hz at 50Hz | T 29 | T 5 |
| T 26 | |
Simulated bell sound | T 2 | T 1 |
| T 27 | |
Continuous 554Hz | T 26 | T 5 |
| T 28 | |
Continuous 440Hz | T 2 | T 5 |
| T 29 | |
Sweeping 800/1000Hz at 7Hz | T 7 | T 5 |
| T 30 | |
420Hz repeating 0.625s on, 0.625s off Australian alert signal | T 32 | T 5 |
| T 31 | |
1200/500Hz at 1 Hz Prepare to Abandon Platform | T 11 | T 1 |
| T 32 | |
Sweeping 500/1200Hz 3.75s on, 0.25s off 15Hz | T 26 | T 1 |
| Country specific or custom tone configurations and alarm frequencies are available upon request. | ||||
.png)
