IS-CP4-PB Push Button Manual Call Point 1-14-020

Description

The IS-CP4 range features enclosures manufactured from corrosion proof, marine grade, copper free LM6 (A413) aluminium which is chromated and powder coated. Available with and without monitoring resistors all versions are certified to IECEx and ATEX standards with additional INMETRO and Ex EAC approvals. The push button mechanism is protected by a spring loaded cover therefore the switch requires a two-action activation. The IS-CP4-PB is user re-settable by rotating the push button.

Downloads

Datasheet	Datasheet.pdf
A version installation	D150-01-601-IS_Issue_2__IS-CP4A-PB_.pdf
B version installation	D150-01-651-IS_Issue_2__IS-CP4B-PB_.pdf
INMETRO Installation Manual	D150-00-501-IS-IEx_Issue_A_IS-CP4.pdf
IECEx certificate	IECEx_SIR_09.0122X_Issue_2_IS-CP4__BExCP5.pdf
ATEX certificate	Sira_09ATEX2287X_Issue_3_IS-CP4__BExCP5.pdf
UKCA Certificate	CSAE_21UKEX2555X_Iss_0_IS-CP4__IS-BExCP5.pdf
INMETRO certificate	IEx16.0033X_R2_IS-CP4_BExCP5.pdf
Russian Ex certificate	EAC_EU_C-GB.AA71.B.00273_20.pdf
RTN permit	RTN_permit_PPC_00-29227.pdf
Declaration of Conformity	DC-008_Issue_J_IS-CP4.pdf
SIL2 Certificate	T939-142_SIL2_IS-CP4.pdf
Declaration of Conformity UKCA	DC-091_Issue_A_IS-CP4_UKCA.pdf
2D drawing (PDF)	D150-05-101_Issue_1.pdf
2D drawing (DWG)	D150-05-101_Issue_1.DWG
Wiring Schematic	D150-06-001_Issue_2__BExCP3A_IS-CP4A_.pdf
Wiring Schematic	D150-06-051_Issue_3__BExCP3B_C_IS-CP4B_.pdf
Nameplate Drawing	D150-09-601_Issue_2_IS-CP4-PB.pdf
Hi-res product image 1 (TIFF)	1-14-020_IS-CP4-PB_.tif
Hi-res product image 2 (TIFF)	1-14-020_IS-CP4-PB-Closed.tif

Specification

IS-CP4A-PB:	A version
Coding;	II 1G Ex ia IIC T6 Ga II 2D Ex tb IIIC T60°C Db IP66
IS-CP4B-PB:	B version
Coding:	II 1G Ex ia IIC T4 Ga IP66
Ambient:	Ta = -40°C to +55°C [-40° to +131°F]
Switch:	Sealed – IP67
Ingress protection:	IP66
Enclosure material:	Marine grade copper free LM6 Aluminium
Enclosure finish:	Chromated & powder coated finish: anti-corrosion.
Colour:	RAL3000 Red (others available on request)
Cable entries:	2 x M20 clearance top and 1 x M20 clearance side. Back box can be rotated to give 2 x bottom and 1 x side entries.
Stopping plugs:	2 x nylon plugs as standard Brass and stainless steel plugs optional
Relative Humidity:	R.H. 95% @ 20°C
Terminals:	6 × 4.0mm² cables
MTBF:	1,079.94 years / 9,433,962 hours - MIL 217
Weight:	0.8Kg

Part Codes

Option:	Code:	Description:
Type:	IS-CP4A-PB IS-CP4B-PB	Type A – no end of line devices Type B – choice of end of line devices
Switch Type: [s]	S	SPCO/SPDT
Terminals: [t]	S	6 × 4mm² terminals
Lift flap: [l]	L	Lift flap
Cable Entry Type:[e]	A B C D E F G	3 x M20 2 × 1/2" NPT – adaptors 2 × 3/4" NPT – adaptors 2 x M25x1.5mm – adaptors 1 × 1/2" NPT – adaptor 1 × 3/4" NPT – adaptor 1 x M25x1.5mm – adaptor
Stopping plug material: [m]	B N P S	Brass Nylon Nickel Plated Brass Stainless Steel
Duty label / Equipment tag: [d]:	1 2 3 4 5 6 7	No Duty label, no Equip. tag Duty label Stainless Steel Duty label St/St + Equip. tag Duty label Metalised Polyester Duty label M. Poly. + Equip. tag Equip. tag only Special label requirement
Product version: [v]	A1	IECEx & ATEX approved
Enclosure colour: [x]	R, B, N, Y, V, S, K, M, Z	Red, Blue, Green, Yellow Red/White, Yellow/Black, Black, Magenta, Red/Black
E.O.L.Module: [Exxx] optional	ExxxR	Resistor value in Ohms e.g. E470R = 470 Ohm (only required for IS-CP4B type)
Series Module: [Sxxx] optional	SxxxR	Resistor value in Ohms e.g. E1K5R = 1.5K Ohm (only required for IS-CP4B type)
Accessories:	SP65-0001-A4 SP65-0002-A4	Pole Mount Bracket Kit St/St A4 (316) Sunshade – St/St A4 (316)

Approvals

ATEX certificate: SIRA 09ATEX2287X,
IECEx certificate: IECEx SIR 09.0122X,
GOST-R certificate: POCC GB.JB05.B03365
SIL 2 compliant to IEC 61508 (2010)

Coding

IS-CP4A-PB
II 1G Ex ia IIC T6 Ga Ta = -40°C to +55°C
II 2D Ex tb IIIC T60°v C Db IP66
Input: Ui = 30V, Ii = 500mA, Pi = 1.1W, Ci = 0, Li = 0
Voltage: 250V ac Max.5.0A Max.
Voltage: 50V dc Max.1.0A Max.

IS-CP4B-PB
II 1G Ex ia IIC T4 Ga Ta = -40°C to +55°
Ui = 30V, Ii = 500mA, Pi = 1.1W, Ci = 0, Li = 0

Options

Alternative housing colours are available to meet specific requirements.
Metalised Polyester “Duty” label.
Series and/or End of Line resistors.

Find the right E2S product