A121AX Appello X 2-22-020

Description

The A121AX records, stores and plays back with unsurpassed clarity, user defined voice messages, music or sounds stored directly to non-volatile memory. Low current consumption and CD quality reproduction in a robust fire retardant Type 4/4X/3R/13, IP66 housing ensure the A121AX Appello X is suitable for all general signalling applications including fire, security and process control.

Downloads

Datasheet	Datasheet.pdf
Installation Manual	D166-00-001-IS_Issue_3__A121AX_AL121AHX_A121AXX_MV121_.pdf
UL certificate of compliance	UL_CoC_-_20121214-S7995_Appello_X.pdf
Russian EAC Declaration of Conformity	D-GB.GA05.B.12595-20-24.03.2025.pdf
Russian Maritime register	19.00193.278.pdf
Ingress Protection certificate	58D22760E_IP66_certificate_-_A121.pdf
Declaration of Conformity	DC-032_Issue_J_Appello_X.pdf
2D drawing (PDF)	SK0110_Issue_D.pdf
2D drawing (DWG)	SK0110_Issue_D.dwg
3D drawing (STEP)	SK0110-3D_Issue_A.STEP
Hi-res product image 1 (TIFF)	2-22-020_A121AX-R.tif
Lo-res product image 1 (JPG)	2-22-020_A121AX-R.jpg
Hi-res product image 2 (TIFF)	2-22-020_A121AX-G.tif
Lo-res product image 2 (JPG)	2-22-020_A121AX-G.jpg

Features

The A121NAX Appello user recordable unit enables the recording of any type of content such as voice or music that can be played back at CD quality output at SPL’s of up to 112dB(A) at 1 metre. This content can be reproduced repeatedly, alternating with or without one of the built-in 45 alarm tones. The alarm tone notification has an output of up to 126dB(A) at 1 metre.
For multiple unit installations the recording process is only required once to create a master unit which can then be used to program all other A121NAX units on the system, guaranteeing synchronisation during playback, using the supplied ‘Synch’ cable.

Direct content storage on non-volatile memory.
CD quality reproduction.
Message length: 4 × 30 seconds
Easy message creation with built in microphone or line-in audio input.
Volume controls for user content and alarm tones.
Available with custom tone configurations and frequencies.
5J Xenon strobe beacon capable of 200cd*.
Factory programming of user supplied content also available.
UL approved for general signalling use.

Specification

Voice content output:	111dB(A) @ 1 metre [102dB(A) @ 10ft/3m]
Music content output:	112dB(A) @ 1 metre [103dB(A) @ 10ft/3m]
Alarm tone output:	126dB(A) @ 1 metre [117dB(A) @ 10ft/3m]
No. of alarm tones:	45 (UKOOA/PFEER compliant)
No. of messages:	4 (30 seconds each)
Volume controls:	Independent controls for user recorded content and built-in alarm tones.
Effective range:	300m/984ft @ 1KHz
Voltages DC:	24vdc (14-30vdc)
Voltages AC:	90-260vac 50/60Hz
Ingress protection:	Type 4 / 4X / 3R / 13, IP66
Rating:	Continuous
Enclosure material:	UL94V0 & 5VA FR ABS
Enclosure colour:	RAL3000 Red or RAL7038 Grey
Fixings:	Stainless Steel
Cable entries:	2 x M20 clearance gland entries. Custom configurations also available.
Terminals:	0.5 to 2.5mm²
Operating temp:	-25° to +55°C [-13° to +131°F]
Storage temp:	-40° to +70°C [-40° to +158°F]
Relative humidity:	90% at 20°C [68°F]
Weight:	DC: 2.10kg/4.62Ibs AC: 2.70kg/5.94Ibs

Current Consumption

Version:	Voltage:	Current :
24V dc	14-30V dc	1.51A*
230V ac	90-260V ac 50/60Hz	517mA*
* current at nominal voltage on Tone 1

Part Codes

Version:	Part code:
14-30V dc	A121AXDC024[x]-UL
90-260V ac	A121AXAC230[x]-UL
[x] = Enclosure colour:	G: Grey R: Red

Approvals

UL & cULs approved: General signalling use
EAC approved (GOST-R)

Tone Table

Stage 1	Frequency Description	Stg 2	Stg 3	Stg 4
T 1	340 Hz Continuous	T 2	T 5	T 29
T 2	800/1000Hz @ 0.25 sec Alternating	T 17	T 5	T 29
T 3	500/1200Hz @ 0.3Hz 0.5 sec Slow Whoop	T 2	T 5	T 29
T 4	800/1000Hz @ 1Hz Sweeping	T 6	T 5	T 29
T 5	2400Hz Continuous	T 3	T 20	T 29
T 6	2400/2900Hz @ 7Hz Sweeping	T 7	T 5	T 29
T 7	2400/2900Hz @ 1Hz Sweeping	T 10	T 5	T 29
T 8	500/1200/500Hz @ 0.3Hz Sweeping	T 2	T 5	T 29
T 9	1200/500Hz @ 1Hz – DIN / PFEER P.T.A.P.	T 15	T 2	T 29
T 10	2400/2900Hz @ 2Hz Alternating	T 7	T 5	T 29
T 11	1000Hz @ 1Hz Intermittent	T 2	T 5	T 29
T 12	800/1000Hz @ 0.875Hz Alternating	T 4	T 5	T 29
T 13	2400Hz @ 1Hz Intermittent	T 15	T 5	T 29
T 14	800Hz 0.25sec on, 1 sec off Intermittent	T 4	T 5	T 29
T 15	800Hz Continuous	T 2	T 5	T 29
T 16	660Hz 150mS on, 150mS off Intermittent	T 18	T 5	T 29
T 17	544Hz (100mS)/440Hz (400mS) – NF S 32-001	T 2	T 27	T 29
T 18	660Hz 1.8sec on, 1.8sec off Intermittent	T 2	T 5	T 29
T 19	1.4KHz-1.6KHz 1s, 1.6KHz-1.4KHz 0.5s -NFC48-265	T 2	T 5	T 29
T 20	660Hz Continuous	T 2	T 5	T 29
T 21	554Hz/440Hz @ 1Hz Alternating	T 2	T 5	T 29
T 22	544Hz @ 0.875 sec. Intermittent	T 2	T 5	T 29
T 23	800Hz @ 2Hz Intermittent	T 6	T 5	T 29
T 24	800/1000Hz @ 50Hz Sweeping	T 29	T 5	T 29
T 25	2400/2900Hz @ 50Hz Sweeping	T 29	T 5	T 29
T 26	Bell	T 2	T 15	T 29
T 27	554Hz Continuous	T 26	T 5	T 29
T 28	440Hz Continuous	T 2	T 5	T 29
T 29	800/1000Hz @ 7Hz Sweeping	T 7	T 5	T 29
T 30	300Hz Continuous	T 2	T 5	T 29
T 31	660/1200Hz @ 1Hz Sweeping	T 26	T 5	T 29
T 32	Two T chime.	T 26	T 15	T 29
T 33	745Hz @ 1Hz Intermittent	T 2	T 5	T 29
T 34	1000 & 2000Hz @ 0.5 sec Alternating – Singapore	T 38	T 45	T 29
T 35	420Hz @ 0.625 sec Australian Alert	T 36	T 5	T 29
T 36	500-1200Hz 3.75sec /0.25sec. Australian Evac.	T 35	T 5	T 29
T 37	1000Hz Continuous – PFEER Toxic Gas	T 9	T 45	T 29
T 38	2000Hz Continuous	T 34	T 45	T 29
T 39	800Hz 0.25sec on, 1 sec off Intermittent	T 23	T 17	T 29
T 40	544Hz (100mS)/440Hz (400mS) – NF S 32-001	T 31	T 27	T 29
T 41	Motor Siren – slow rise to 1200 Hz	T 2	T 5	T 29
T 42	Motor Siren – slow rise to 800 Hz	T 2	T 5	T 29
T 43	1200 Hz Continuous	T 2	T 5	T 29
T 44	Motor Siren – slow rise to 2400 Hz	T 2	T 5	T 29
T 45	1KHz 1s on, 1s off Intermittent – PFEER Gen. Alarm	T 38	T 34	T 29
Country specific or custom tone configurations and alarm frequencies are available upon request.

Find the right E2S product