| Datasheet | Datasheet.pdf |
| Installation Manual | D207-01-501-IS_Issue_5__MC1X05_.pdf |
| -Install manual Telephone-Relay version [T] | D207-01-581-IS_Issue_3__MC1X05-T_.pdf |
| Russian EAC Declaration of Conformity | D-GB.GA05.B.12595-20-24.03.2025.pdf |
| Russian Fire certificate | GOST-R_POCC_GB.05.H00144_Industrial.PDF |
| Russian Maritime register | 19.00193.278.pdf |
| Declaration of Conformity | DC-028_Issue_J_Marine.pdf |
| 2D drawing (PDF) | D207-05-501_Issue_A.pdf |
| 2D drawing (DWG) | D207-05-501_Issue_A.dwg |
| 3D drawing (STEP) | D207-05-501-3D_Issue_A.STEP |
| Wiring Schematic DC voltage | D207-06-501_Issue_C.pdf |
| Wiring Schematic AC voltage | D207-06-505_Issue_A__MC1X05-AC_.pdf |
| Pole Mount & Sun Shade Drawing | D217-05-671_Issue_2__MC1_F_.pdf |
| Alarm Horn Sounder: | |
|---|---|
| Maximum output: | 117dB(A) @ 1 m +/- 3dB [108dB(A) @ 10ft/3m +/- 3dB] |
| Nominal output: | 114dB(A) @ 1m +/- 3dB [103dB(A) @ 10ft/3m] +/- 3dB |
| No. of tones: | 64 (UKOOA / PFEER compliant) |
| No. of stages: | 4 |
| Volume control: | Full range control |
| Effective range: | 108m/355ft @ 1KHz |
| Stage switching: | Negative, positive, voltage free |
| Xenon Strobe Beacon: | |
| Energy: | 5 Joules(5Ws) |
| Flash rate: | 1Hz (60 fpm) |
| Peak Candela: | 500,000 cd – calculated from energy (J) |
| Eff. Intensity cd: | 250 cd – calculated from energy (J) |
| Peak Candela: | 39,463 cd* – measured ref. to I.E.S. |
| Eff. Intensity cd: | 120 cd* – measured ref. to I.E.S. |
| Lens colours: | Amber, Blue, Clear, Green, Magenta, Red & Yellow |
| General: | |
| Ingress protection: | IP66 & IP67 Type 4/4X/13 |
| Enclosure material: | High impact UL94 V0 & 5VA FR ABS |
| Enclosure colour: | Grey (RAL7038) or Red (RAL3000 |
| Dome material: | Borosilicate glass |
| Lens colour filter: | Field replaceable UV stable PC |
| Lens guard: | 316 (A4) Stainless steel |
| Cable entries: | 2 x M20; 1 x M20 & 1 × 1/2"NPT; 2 × 1/2"NPT supplied with blanking plug |
| Terminals: | 0.5 – 2.5mm² (20-14 AWG) |
| Line monitoring: | Diode polarized for use in supervised circuits |
| Operating temp: | -40 to +66°C [-40° to +151°F] |
| Storage temp: | -40 to +70°C [-40° to +158°F] |
| Relative humidity: | 95% at 20°C [68°F] |
| Weight : | DC: 3.00kg/6.6Ibs AC:3.50kg/7.7Ibs |
| *Candela measurements representative of performance with clear lens at optimum voltage | |
| Product Version: | Nominal Voltage: | Voltage Range: | Beacon Current: | Horn Current: |
|---|---|---|---|---|
| DC012 | 12V dc | 10-14V dc | 550mA | 280mA |
| DC024 | 24V dc | 20-28V dc | 300mA | 224mA |
| DC048 | 48Vdc | 42-54V dc | 180mA | 122mA |
| AC115 | 115Vac | ±10% 50/60Hz | 140mA | 100mA |
| AC230 | 230V ac | ±10% 50/60Hz | 55mA | 64mA |
| Variable: | Identifier: | Description: |
|---|---|---|
| Product type: | MC1X05 | Combined alarm horn sounder & Xenon strobe |
| Type: | F | Flare re-entrant horn |
| Voltage: | AC115 AC230 DC012 DC024 DC048 |
115V ac 50/60Hz 230V ac 50/60Hz 12V dc (10-14Vdc) 24V dc (20-28Vdc) 48V dc (42-54Vdc) |
| Cable entries: [e] | A B C |
M20x1.5 & ½” NPT M20x1.5 & M20x1.5 (Default) ½” NPT & ½” NPT |
| Stopping plug material: [m] | N | Nylon |
| Bracket & Guard: [s] | 1 3 |
316 (A4) Stainless Steel 316 (A4) Stainless Steel with Equipment tag |
| Product version: [v] |
A T |
CE, EAC, RMRS Telephone/Relay Initiate – CE, EAC, RMRS |
| Product option: [o] |
1 Z X Y |
Standard product Custom alarm tone software – contact E2S Custom configuration – contact E2S Stage control Config. 4 or 8 |
| Enclosure colour: [x] | G R S |
Grey Red Special colour – contact E2S |
| Lens colour: [y] | A B C G M R Y |
Amber Blue Clear Green Magenta Red Yellow |
| Accessories: | ||
| SP65-0001-A4 SP65-0003-A4 |
Pole Mount Bracket Kit St/St A4 (316) Sunshade – St/St A4 (316) |
|
| Alarm stage control: | ||
| Please review the installation manual and wiring schematics for remote stage control and EOL resistor monitoring configuration options: | ||
| Config. 1 or 5 [DC]: | Factory default. Common negative, positive switching. Up to 4 Alarm Stages. EOL monitoring Alarm Stage 1 only | |
| Config. 2 or 6 [DC]: | User setting. Common positive, negative switching. Up to 4 Alarm Stages. EOL monitoring Alarm Stage 1 only | |
| Config. 3 or 7 [DC]: | User setting. Common negative, positive switching activation of Alarm Stages 1 & 2 with EOL on both stages. Reverse polarity monitoring | |
| Config. 4 or 8 [DC]: | Product option ‘Y’. Independent activation of Alarm Stages 1 & 2 with EOL on both stages. Forward polarity monitoring | |
| Config. 1 or 2 [AC]: | Factory default. Up to 4 Alarm Stages. Stage 1 activated at power on. Stages 2, 3 and 4 via volt free contacts | |
| Stage 1 | WAV file | Frequency Description. | Stage 2 | Stage 3 | Stage 4 |
|---|---|---|---|---|---|
| T 1 |   |
1000 Continuous – PFEER Toxic Gas | T 3 | T 2 | T 44 |
| T 2 | |
1200/500 @ 1Hz Sweeping – DIN / PFEER P.T.A.P. | T 1 | T 3 | T 44 |
| T 3 | |
1000 @ 0.5Hz (1s on, 1s off) Intermittent – PFEER Gen. Alarm | T 1 | T 2 | T 44 |
| T 4 | |
1.4KH-1.6KHz 1s, 1.6KHz-1.4KHz 0.5s – NF C 48-265 | T 44 | T 24 | T 1 |
| T 5 | |
544(100mS)/440 (400mS) – NF S 32-001 | T 52 | T 19 | T 1 |
| T 6 | |
1500/500 – (0.5s on , 0.5s off) x3 + 1s gap – AS4428 | T 7 | T 44 | T 1 |
| T 7 | |
500-1500Hz Sweeping 2 sec on 1 sec off – AS4428 | T 6 | T 44 | T 1 |
| T 8 | |
500/1200Hz @ 0.26Hz(3.3s on, 0.5s off) – NEN 2575 | T 44 | T 24 | T 35 |
| T 9 | |
1000 (1s on, 1s off)x7 + (7s on, 1s off) – IMO Code 1a | T 18 | T 34 | T 1 |
| T 10 | |
1000 (1s on, 1s off)x7 + (7s on, 1s off) – IMO Code 1a | T 21 | T 34 | T 1 |
| T 11 | |
420(0.5s on, 0.5s off)x3 + 1s gap – ISO 8201 Temporal | T 44 | T 1 | T 8 |
| T 12 | |
1000(0.5s on, 0.5s off)x3 + 1s gap – ISO 8201 Temporal | T 44 | T 1 | T 8 |
| T 13 | |
422/775 – (0.85 on, 0.5 off) x3 + 1s gap – NFPA Temporal | T 44 | T 1 | T 8 |
| T 14 | |
1000/2000 @ 1Hz – Singapore | T 23 | T 3 | T 35 |
| T 15 | |
300 Continuous | T 44 | T 24 | T 35 |
| T 16 | |
440 Continuous | T 44 | T 24 | T 35 |
| T 17 | |
470 Continuous | T 44 | T 24 | T 35 |
| T 18 | |
500 Continuous – IMO code 2 (Low) | T 44 | T 24 | T 35 |
| T 19 | |
554 Continuous | T 64 | T 24 | T 35 |
| T 20 | |
660 Continuous | T 44 | T 24 | T 35 |
| T 21 | |
800 Continuous – IMO code 2 (High) | T 44 | T 24 | T 35 |
| T 22 | |
1200 Continuous | T 44 | T 24 | T 35 |
| T 23 | |
2000 Continuous | T 15 | T 3 | T 35 |
| T 24 | |
2400 Continuous | T 48 | T 20 | T 35 |
| T 25 | |
440 @ 0.83Hz (0.60s on, 0.60s off) Intermittent | T 1 | T 44 | T 8 |
| T 26 | |
470 @ 0.9Hz (0.55s on, 0.55s off) Intermittent | T 1 | T 44 | T 8 |
| T 27 | |
470 @ 5Hz (0.10s on, 0.10s off) Intermittent | T 1 | T 44 | T 8 |
| T 28 | |
544 @ 1.14Hz (0.43s on, 0.44s off) Intermittent | T 44 | T 24 | T 8 |
| T 29 | |
655 @ 0.875Hz (0.57s on, 0.57s off) Intermittent | T 1 | T 44 | T 8 |
| T 30 | |
660 @ 0.28Hz (1.80s on, 1.80s off) Intermittent | T 44 | T 24 | T 8 |
| T 31 | |
660 @ 3.3Hz (0.15s on, 0.15s off) Intermittent | T 30 | T 24 | T 8 |
| T 32 | |
745 @ 1Hz (0.50s on, 0.50s off) Intermittent | T 44 | T 24 | T 8 |
| T 33 | |
800 (0.25s on, 1.00s off) Intermittent | T 53 | T 24 | T 8 |
| T 34 | |
800 @ 2Hz (0.25s on, 0.25s off) – IMO code 3.a (High) | T 56 | T 24 | T 8 |
| T 35 | |
1000 @ 1Hz (0.50s on, 0.50s off) Intermittent | T 44 | T 24 | T 8 |
| T 36 | |
2400 @ 1Hz (0.50s on, 0.50s off) Intermittent | T 21 | T 24 | T 8 |
| T 37 | |
2900 @ 5Hz (0.10s on, 0.10s off) Intermittent | T 53 | T 24 | T 8 |
| T 38 | |
363/518 @ 1Hz (0.50s / 0.50s) Alternating | T 1 | T 8 | T 19 |
| T 39 | |
450/500 @ 2Hz (0.25s / 0.25s) Alternating | T 1 | T 8 | T 19 |
| T 40 | |
554/440 @ 1Hz (0.50s / 0.50s) Alternating | T 44 | T 24 | T 19 |
| T 41 | |
554/440 @ 0.65Hz (0.76s / 0.76s) Alternating | T 1 | T 8 | T 19 |
| T 42 | |
561/760 @ 0.83Hz (0.60s / 0.60s) Alternating | T 1 | T 8 | T 19 |
| T 43 | |
780/600 @ 0.96Hz (0.52s / 0.52s) Alternating | T 1 | T 8 | T 19 |
| T 44 | |
800/1000 @ 2Hz (0.25s / 0.25s) Alternating | T 5 | T 24 | T 19 |
| T 45 | |
970/800 @ 2Hz (0.25s / 0.25s) Alternating | T 1 | T 8 | T 19 |
| T 46 | |
800/1000 @ 0.875Hz (0.57s / 0.57s) Alternating | T 53 | T 24 | T 19 |
| T 47 | |
2400/2900 @ 2Hz (0.25s / 0.25s) Alternating | T 57 | T 24 | T 19 |
| T 48 | |
500/1200 @ 0.3Hz (1.67s / 1.67s) Sweeping | T 44 | T 24 | T 12 |
| T 49 | |
560/1055 @ 0.18Hz (2.73s / 2.73s) Sweeping | T 44 | T 24 | T 12 |
| T 50 | |
560/1055 @ 3.3Hz (0.15s / 0.15s) Sweeping | T 44 | T 24 | T 12 |
| T 51 | |
600/1250 @ 0.125Hz (4s / 4s) Sweeping | T 44 | T 24 | T 12 |
| T 52 | |
660/1200 @ 1Hz (0.50s / 0.50s) Sweeping | T 64 | T 24 | T 12 |
| T 53 | |
800/1000 @ 1Hz (0.50s / 0.50s) Sweeping | T 56 | T 24 | T 12 |
| T 54 | |
800/1000 @ 7Hz (0.07s / 0.07s) Sweeping | T 57 | T 24 | T 12 |
| T 55 | |
800/1000 @ 50Hz (0.01s / 0.01s) Sweeping | T 54 | T 24 | T 12 |
| T 56 | |
2400/2900 @ 7Hz (0.07s / 0.07s) Sweeping | T 57 | T 24 | T 12 |
| T 57 | |
2400/2900 @ 1Hz (0.50s / 0.50s) Sweeping | T 47 | T 24 | T 12 |
| T 58 | |
2400/2900 @ 50Hz (0.01s / 0.01s) Sweeping | T 54 | T 24 | T 12 |
| T 59 | |
2500/3000 @ 2Hz (0.25s / 0.25s) Sweeping | T 44 | T 24 | T 12 |
| T 60 | |
2500/3000 @ 7.7Hz (0.65s / 0.65s) Sweeping | T 44 | T 24 | T 12 |
| T 61 | |
800Hz Motor Siren | T 44 | T 24 | T 12 |
| T 62 | |
1200Hz Motor Siren | T 44 | T 24 | T 12 |
| T 63 | |
2400Hz Motor Siren | T 44 | T 24 | T 12 |
| T 64 | |
Simulated Bell | T 44 | T 21 | T 12 |
| Country specific or custom tone configurations and alarm frequencies are available upon request. | |||||
.png)
