AL121AXX Appello X Recordable Sounder & Xenon Beacon 2-32-050

Description

Low current consumption and CD quality reproduction in a robust fire retardant Type 4/4X/3R/13, IP66 housing ensure the AL121AXX Appello X is suitable for all general signalling applications including fire, security and process control.

Downloads

Datasheet	Datasheet.pdf
Installation Manual	D166-00-001-IS_Issue_3__A121AX_AL121AHX_A121AXX_MV121_.pdf
UL certificate of compliance	UL_CoC_-_20121214-S7995_Appello_X.pdf
Russian EAC Declaration of Conformity	D-GB.GA05.B.12595-20-24.03.2025.pdf
Russian Maritime register	19.00193.278.pdf
Declaration of Conformity	DC-032_Issue_J_Appello_X.pdf
2D drawing (PDF)	SK0262_Issue_A.pdf
2D drawing (DWG)	SK0262_Issue_A.dwg
3D drawing (IGS)	SK0262-3D_Issue_A.IGS
3D drawing (STEP)	SK0262-3D-3D_Issue_A.STEP
Hi-res product image 1 (TIFF)	2-32-050_AL121AXX-R-R.tif
Hi-res product image 2 (TIFF)	2-32-050_AL121AXX-G-R.tif
Lo-res product image 1 (JPG)	2-32-050_AL121AXX-R-R.jpg
Lo-res product image 2 (JPG)	2-32-050_AL121AXX-G-R.jpg

Features

The AL121AXX Appello user recordable unit enables
the recording of any type of content such as voice or music that can be played back at CD quality output at SPL’s of up to 112dB(A) at 1 metre. This content can be reproduced repeatedly, alternating with or without one of the built-in 45 alarm tones. The alarm tone notification has an output of up to 126dB(A) at 1 metre.

For multiple unit installations the recording process is only required once to create a master unit which can then be used to program all other AL105NAX units
on the system, guaranteeing synchronisation during
playback, using the supplied ‘Synch’ cable.

Direct content storage on non-volatile memory.
CD quality reproduction.
Message length: 4 × 30 seconds
Easy message creation with built in microphone or line-in audio input.
Volume controls for user content and alarm tones.
Available with custom tone configurations
and frequencies.
5J Xenon strobe beacon capable of 200cd*.
Factory programming of user supplied content
also available.
UL approved for general signalling use.

Specification

Alarm sounder:
Voice output:	111dB(A) @ 1 metre
Music output:	112dB(A) @ 1 metre
Alarm output:	126dB(A) @ 1 metre
Alarm tones:	x 45 (UKOOA/PFEER compliant)
Messages:	x 4 (30 seconds each)
Controls:	Independent volume controls for user content and alarm tones
Effective range:	300m/984ft @ 1KHz
Xenon beacon:
Energy:	5 Joules (5Ws)
Flash rate:	1Hz (60 fpm)
Peak Candela:	86,935 cd
Candela:	200 cd* (effective intensity)
General:
Ingress protection:	Type 4 / 4X / 3R / 13, IP66
Rating:	Continuous
Housing material:	UL94V0 & 5VA FR ABS
Housing colour:	RAL3000 Red, RAL7038 Grey and White
Fixings:	Stainless Steel
Cable entries:	2 x M20 clearance gland entries. Custom configurations also available.
Terminals:	0.5 to 2.5mm²
Operating temp:	-25° to +55°C [-13° to +131°F]
Storage temp:	-40° to +70°C [-40° to +158°F]
Relative humidity:	90% at 20°C [68°F]
Weight	DC: 1.00kg/2.2Ibs AC: 1.20kg/2.64Ibs
*Candela measurements representative of performance with clear lens at optimum voltage.
*SPL data +/-3dB(A). Measured at optimum voltage.

Current Consumption

Version:	Voltage:	Range:	Current:
Alarm+Xenon	24V dc	20-28V dc	1.76A*
Alarm+Xenon	115V ac 50/60Hz	+/-10%	602mA*
Alarm+Xenon	230V ac 50/60Hz	+/-10%	552mA*
* current at nominal voltage on Tone 1

Part Codes

Version:	Voltage:	Part code:
Alarm+Xenon	24V dc	AL121AXXDC024[x]/[y]-UL
Alarm+Xenon	115V ac	AL121AXXAC115[x]/[y]-UL
Alarm+Xenon	230V ac	AL121AXXAC230[x]/[y]-UL
[x] = Housing colour:	G: Grey R: Red W: White
[y] = Xenon Lens colour:	A: Amber B: Blue C: Clear G: Green M: Magenta R: Red Y: Yellow

Approvals

UL & cULs approved: General signalling use
EAC approved (GOST-R)

Tone Table

Stage 1	Frequency Description	Stg 2	Stg 3	Stg 4
T 1	340 Hz Continuous	T 2	T 5	T 29
T 2	800/1000Hz @ 0.25 sec Alternating	T 17	T 5	T 29
T 3	500/1200Hz @ 0.3Hz 0.5 sec Slow Whoop	T 2	T 5	T 29
T 4	800/1000Hz @ 1Hz Sweeping	T 6	T 5	T 29
T 5	2400Hz Continuous	T 3	T 20	T 29
T 6	2400/2900Hz @ 7Hz Sweeping	T 7	T 5	T 29
T 7	2400/2900Hz @ 1Hz Sweeping	T 10	T 5	T 29
T 8	500/1200/500Hz @ 0.3Hz Sweeping	T 2	T 5	T 29
T 9	1200/500Hz @ 1Hz – DIN / PFEER P.T.A.P.	T 15	T 2	T 29
T 10	2400/2900Hz @ 2Hz Alternating	T 7	T 5	T 29
T 11	1000Hz @ 1Hz Intermittent	T 2	T 5	T 29
T 12	800/1000Hz @ 0.875Hz Alternating	T 4	T 5	T 29
T 13	2400Hz @ 1Hz Intermittent	T 15	T 5	T 29
T 14	800Hz 0.25sec on, 1 sec off Intermittent	T 4	T 5	T 29
T 15	800Hz Continuous	T 2	T 5	T 29
T 16	660Hz 150mS on, 150mS off Intermittent	T 18	T 5	T 29
T 17	544Hz (100mS)/440Hz (400mS) – NF S 32-001	T 2	T 27	T 29
T 18	660Hz 1.8sec on, 1.8sec off Intermittent	T 2	T 5	T 29
T 19	1.4KHz-1.6KHz 1s, 1.6KHz-1.4KHz 0.5s -NFC48-265	T 2	T 5	T 29
T 20	660Hz Continuous	T 2	T 5	T 29
T 21	554Hz/440Hz @ 1Hz Alternating	T 2	T 5	T 29
T 22	544Hz @ 0.875 sec. Intermittent	T 2	T 5	T 29
T 23	800Hz @ 2Hz Intermittent	T 6	T 5	T 29
T 24	800/1000Hz @ 50Hz Sweeping	T 29	T 5	T 29
T 25	2400/2900Hz @ 50Hz Sweeping	T 29	T 5	T 29
T 26	Bell	T 2	T 15	T 29
T 27	554Hz Continuous	T 26	T 5	T 29
T 28	440Hz Continuous	T 2	T 5	T 29
T 29	800/1000Hz @ 7Hz Sweeping	T 7	T 5	T 29
T 30	300Hz Continuous	T 2	T 5	T 29
T 31	660/1200Hz @ 1Hz Sweeping	T 26	T 5	T 29
T 32	Two T chime.	T 26	T 15	T 29
T 33	745Hz @ 1Hz Intermittent	T 2	T 5	T 29
T 34	1000 & 2000Hz @ 0.5 sec Alternating – Singapore	T 38	T 45	T 29
T 35	420Hz @ 0.625 sec Australian Alert	T 36	T 5	T 29
T 36	500-1200Hz 3.75sec /0.25sec. Australian Evac.	T 35	T 5	T 29
T 37	1000Hz Continuous – PFEER Toxic Gas	T 9	T 45	T 29
T 38	2000Hz Continuous	T 34	T 45	T 29
T 39	800Hz 0.25sec on, 1 sec off Intermittent	T 23	T 17	T 29
T 40	544Hz (100mS)/440Hz (400mS) – NF S 32-001	T 31	T 27	T 29
T 41	Motor Siren – slow rise to 1200 Hz	T 2	T 5	T 29
T 42	Motor Siren – slow rise to 800 Hz	T 2	T 5	T 29
T 43	1200 Hz Continuous	T 2	T 5	T 29
T 44	Motor Siren – slow rise to 2400 Hz	T 2	T 5	T 29
T 45	1KHz 1s on, 1s off Intermittent – PFEER Gen. Alarm	T 38	T 34	T 29
Country specific or custom tone configurations and alarm frequencies are available upon request.

Find the right E2S product